5 Simple Plumbing Repairs You Can Do Yourself
We extensively test and research all services we review. Here's why you can trust us.

5 Simple Plumbing Repairs You Can Do Yourself 

Hiring a plumber for time-sensitive plumbing issues is vital. However, even if most plumbing projects look intimidating, some plumbing replacements and repairs can be pretty simple. 

With a few basic tools and plumbing know-how, you can probably tackle common plumbing issues without the help of a plumber. Here are some simple plumbing repairs you can do yourself to serve as your guide. 

Repairing Leaky Faucet

Do you have an annoying leaky faucet in your sink or bathroom? Don’t call the kitchen renovation or bathroom renovation service just yet because this problem is a relatively easy repair project to work on. 

First, turn off your water supply. Next, disassemble the faucet using a wrench and make sure that you keep each part in the same order you removed it. 

If there is mineral deposit buildup inside, combine vinegar and baking soda to scrub it off. On the other hand, if there is a damaged gasket or part, replace it. After that, assemble the faucet and check if the leak is fixed. 

Installing Faucets 

If you think your faulty kitchen or bathroom faucet is damaged beyond repair, replacing it is your best option. Go to a hardware store and purchase the same faucet as your old one. 

After that, you’ll just have to follow the assembly instructions that come with your new faucet. Yes, they actually come with those! 

Even if they don’t, you can usually ask the vendor where to get those instructions. In most cases, they’ll provide them themselves.

Fixing Low Water Pressure Problem 

Low water pressure issues can be a sign of various plumbing problems, but sometimes, the repair may just take an hour or two. If the cause of the problem is a blockage or buildup, there’s a good chance that you can tackle it on your own. 

Try to adjust the water pressure from your pressure tank. If nothing changes, this might be caused by excessive calcium buildup within the faucet valve or aerator. 

In this case, you’ll have to unscrew the aerator and soak it on white vinegar overnight. Once done, you can put it back and see if the water pressure has improved. 

If the problem is not resolved, you can call one of the handyman services or plumber we reviewed. Besides that, these repair service listicles we published might also come in handy for you in the future:

Clearing Drain Blockage

Do you hear a weird gurgling noise and smell an unpleasant odor in your sink? Does it take some time for water to drain?

If you experience one of these signs, you might have a clogged drain… but don’t panic just yet because this can be resolved with simple fixes. 

Clumped hair, soap, food waste, and other small objects are the common culprits of a clogged drain. You can remove the blockage using a bent wire hanger. 

Alternatively, if the blockage is caused by grease and dirt buildup, you can use the tried and tested baking soda and vinegar trick. Pour hot water on your drain, follow it with some baking soda and vinegar, and let it sit for around 20 to 30 minutes. 

Bear in mind that this repair tip is just for removing the blockage or buildup in your drain and not within your plumbing system.

Installing a Showerhead 

Installing a new showerhead can be pretty easy, and it’s also a good bathroom improvement project to work on.  

Remove the old showerhead by turning counterclockwise using your hands or a pair of pliers. 

Next, get plumber’s tape and wrap it around four to five times around the threads of the shower arm. Fit your new showerhead on the shower arm and turn it clockwise. 

You can tighten it more using the pliers. Lastly, turn your shower on to check if there are any leaks.